The KBE5L (2-Step)
The newly upgraded KBE5L 2-Step is now equipped with a High and Low output control making it very economical. Also included is a Fuel preheater to keep fuel moving smoothly as temperature decreases.
KBE5L’s state of the art combustion chamber enables virtually 100% fuel to energy conversion. This translates to clean, odorless, smokeless operation and, more importantly, fuel savings.
Impervious to nature’s elements (wind, rain, and snow), the KBE5L is able to transfer infrared heat directly to the object without any loss of heat or air movement.
- Advantages
- Specifications
- Applications
- Downloads
Advantages
SUNLIGHT WARMTH – VAL6’s radiant heat penetrates evenly and directly into surfaces just like sunlight.
BEST CHOICE FOR OUTDOORS – VAL6 is not affected by wind, unlike forced air heaters that suffer from heat loss in the ambient air.
HEAT TRANSFER – VAL6 generates infrared heat directly to the object without any air movement creating a dust-free comfortable environment.
ODORLESS – VAL6’s perfect combustion system produces no odor and no smoke while running.
ENERGY SAVINGS – VAL6’s state of the art combustion chamber enables virtually 100% fuel to energy conversion.
PORTABLE – This heater can be taken virtually anywhere that you need heat.
Specifications
Item/Model - KBE5L (2-STEP)
Heat Output - High: 118,000 BTU/hr - Low: 100,000 BTU/hr
Nozzle - High: 0.90 gallons/hr - Low: 0.75 gallons/hr
Fuel - Diesel, Kerosene
Tank Capacity - 15 gallons
Power Source - 120 V 60 Hz
Power Consumption (in ignition) - 150 W
Power Consumption (in operation) - High: 97 W - Low: 96 W
Safety Device - Photocell flame monitor, 3A Fuse, Tip-over switch
Adjustable Disk Angle - Tilts upward 20 degrees
External Dimensions (HxWxD) - 36.3 x 28.0 x 29.2 in
Dry Weight - 92.6 lbs
Applications
- Factory, Plant, Workshop
- Outdoor projects
- Construction sites
- Drying of paint and adhesives
- Asphalt and concrete preparation